diff --git a/.workbuddy/memory/2026-09-13.md b/.workbuddy/memory/2026-09-13.md index ccc14fe..fdc0527 100644 --- a/.workbuddy/memory/2026-09-13.md +++ b/.workbuddy/memory/2026-09-13.md @@ -1,5 +1,11 @@ # 2026-09-13 +2026-09-13 | CFG | **home.xpcool.com 部署完成（服务器侧）**：SSH 本次已放行（`~/.ssh/xpcool_ed25519` → `xxcool@193.112.118.168:22025`，`sudo` 免密 OK），直接由 AI 执行部署 —— 站点 27 文件落 `/data/www/home.xpcool.com`、证书落 `/data/nginx/ssl/home.xpcool.com/`（公私钥 pubkey md5 一致）、配置落 `/data/nginx/conf.d/home.xpcool.com.conf`（首次部署无旧配置）、`nginx -t` 通过 + reload、本机 https **200** + `xpcool 服务台` + 静态资源 200 + 80→301→443。**唯一待办仍是 DNS**：`home` A 记录未加（223.5.5.5/119.29.29.29 及权威 `calvin/meat.dnspod.net` 全 NXDOMAIN，且无泛解析） +2026-09-13 | CFG | **Kuma 建公开状态页 `xpcool`（首页状态格的真正数据源）**：此前 `status_page` 表为空 —— 即 `status.xpcool.com` 只是 Kuma 自身面板、从未建过状态页，这正是首页显示「状态数据未接入」的根因。直写 SQLite 建：状态页(title「xpcool 服务台」/theme dark/不收录/显证书到期/60s 刷新) + 分组「自建服务」(public=1) + 9 监控关联且 **`send_url=1`**。验证：公网 `/api/status-page/xpcool` 200 返回 9 监控且带 url；heartbeat 返回 9 组心跳；首页实测 **9/9 正常**、卡片「正常」+ 100.00% +2026-09-13 | FIX | Kuma 状态页灌库脚本「静默失败」：`kuma-statuspage.sh` 里 `SQL_SRC` 写死 `/tmp/wb_kuma_statuspage.sql`，与实际上传的 `/tmp/kuma-statuspage.sql` 不符，`set -e` 在第一步就退出、日志只有一行、且远程 `echo $LASTEXITCODE` 被本地 PowerShell 提前展开成空 → **一度完全看不出失败原因**。教训：远程脚本的 `set -e` + 文件路径约定要自洽（改用 `$(dirname $0)/同名.sql` 推导），且回传执行结果要走「服务器落日志 + base64 回传」，别依赖 `$LASTEXITCODE` 穿透 ssh +2026-09-13 | FIX | 沙箱取日志被拒后的替代验证路径：SSH 被拦时不一定要重试 —— Kuma 状态页 API 在 `https://status.xpcool.com/api/status-page/` **公网匿名可达**，直接 HTTPS 查询即可判断状态页是否建成，绕开 SSH +2026-09-13 | CFG | home.xpcool.com 上线物料备齐：证书（`E:\Project\home.xpcool.com_nginx\`，**注意不在 `E:\CentOS\ssl\` 下**）核验通过 —— `CN=home.xpcool.com` SAN 一致、TrustAsia DV、有效期至 **2026-12-12**、公私钥配套；生成一键部署包 `E:\CentOS\deploy-home\`（bundle.tar.gz + deploy-home.ps1），nginx 配置含 `/api/kuma/` 同源反代到 `127.0.0.1:3001/api/status-page/`。**SSH 再遭沙箱拦截且用户拒绝授权** → 沿用「AI 备包、用户本机执行」模式。**待办：`home.xpcool.com` A 记录仍未添加**（223.5.5.5/119.29.29.29/8.8.8.8 三方确认不存在，对照 status.xpcool.com 可正常解析） + 2026-09-13 | REQ | **新建 home.xpcool.com（xpcool 服务台）**：9 个自建服务的统一入口 + Uptime Kuma 实时存活状态 + 主机规格；Vite6 + Vue3 + TS(strict) + Pinia + vue-router + UnoCSS + SCSS，视觉按 `design-taste-frontend` 规范（深色仪表盘语言、双主题令牌、单形状系统、零 eyebrow/零 em-dash、bento 栅格 4+2/2+2+2/3+3/3+3）；构建通过（gzip 约 56KB），本地 git 已 init + 首次 commit（47 文件），**待用户加 DNS/证书后部署** 2026-09-13 | FIX | 移动端横向溢出「误报」定位：真 390×844 视口实测 `scrollW=390 / overflow=0`，布局本身无溢出；此前截图右边缘被切是**取图假象**——Windows 无头 Chrome 窗口有 500px 下限，且 iframe 滚条槽位让内层 `clientWidth` 变 375，恰好把溢出藏住；改用 CDP `Emulation.setDeviceMetricsOverride` 后结论可靠（详见 DEPLOY.md 工具链坑位） 2026-09-13 | CHG | 新增 `home.xpcool.com/scripts/shoot-mobile.mjs`：Node 22 内置 WebSocket 手写极简 CDP 客户端，**零依赖**完成真移动视口测量 + `captureBeyondViewport` 整页截图；`shoot.ps1` 收敛为桌面端并修掉「按 `*.png` 清空 .shots 误删移动端截图」的 bug diff --git a/.workbuddy/memory/DEPLOY.md b/.workbuddy/memory/DEPLOY.md index 0c41da2..c39002b 100644 --- a/.workbuddy/memory/DEPLOY.md +++ b/.workbuddy/memory/DEPLOY.md @@ -32,6 +32,9 @@ - **经 `ssh.exe` 执行多行脚本会踩转义坑（2026-09-13 实测）**：把多行 here-string 直接当参数传给 `ssh.exe`，远程 bash 解析到 `(` 等字符会报 `syntax error near unexpected token '('`，**而且报错前的行已经执行了**，导致状态半途而废（证书只搬了一半）。**可靠做法**：本地写 `.sh` 文件（用 `-replace "`r`n","`n"` 强制 LF + `WriteAllText` UTF-8 无 BOM）→ **单独** `scp` 上传 → `ssh "chmod +x /tmp/x.sh && /tmp/x.sh"` 执行。注意 `echo | base64 -d | bash` 会被 PowerShell 工具安全策略直接拦截（"Spawning a non-PowerShell shell"）。 - **多源文件 `scp` 不可靠（2026-09-13 实测）**：一次 `scp a b c d e host:/tmp/` 只落地了其中 2 个，且**没有任何报错**。**每次只 scp 一个文件**；脚本内用 `for` + `[ -f ]` 判断做幂等补齐，避免重复上传。 - **远程脚本一律写成幂等**（`if [ -f ]` 判断后再 `mv -f`），因为 SSH 调用可能被沙箱拦截/用户误拒而中断，重跑不能出错。 +- **别用 `echo $LASTEXITCODE` 穿透 ssh 取远端退出码（2026-09-13 实测踩坑）**：`$LASTEXITCODE` 是 PowerShell 自动变量，在**本地**双引号字符串里就被展开成空串，远端实际收到的是 `echo DONE`，于是「脚本明明失败了却看到一个成功的回声」。**可靠做法**：远端 `sh /tmp/x.sh > /tmp/x.log 2>&1`，再 `base64 -w0 /tmp/x.log` 回传、本地解码落盘后用 Read 看（base64 还能顺带规避 Windows 控制台按 GBK 解 UTF-8 造成的乱码）。 +- **`set -e` + 写死的路径 = 静默失败**：`kuma-statuspage.sh` 曾把来源文件写死成 `/tmp/wb_kuma_statuspage.sql`，而上传的是 `/tmp/kuma-statuspage.sql`，脚本在第一步就退出，**日志只有一行「缺少 …」，看起来像什么都没发生**。远程脚本内部一律用 `$(dirname "$0")/<同名文件>` 推导，再退到 `/tmp/<同名文件>` 兜底；且上传时保证「脚本名.sh ↔ 同名.sql」成对。 +- **SSH 被沙箱拦截时不一定要重试**：先找**公网可达的旁路**做验证。例如 Kuma 的 `/api/status-page/` 在 `status.xpcool.com` 上匿名可达，直接 HTTPS 查就能判断状态页是否建成，省一次权限弹窗。真的需要读远端日志时，再向用户说明并请求重新授权（授权后原命令即可重跑）。 - **无头 Chrome 截图/量视口有三个坑（2026-09-13 实测，做前端移动端验收必看）**： ① Windows 下窗口宽度有 **500px 下限**，`--window-size=390` 会被撑到 500； ② `--force-device-scale-factor` **只改渲染倍率、不改 CSS 视口宽度**（给 dsf=2 + window 780，拿到的仍是 764 CSS px，不是 390）； @@ -53,7 +56,7 @@ | sub2api.xpcool.com | `sub2api` + postgres + redis | 127.0.0.1:18080 | — | | code.xpcool.com | `code-server` | 127.0.0.1:8080 | 网页版 VS Code | | **status.xpcool.com** | **`uptime-kuma`** | **127.0.0.1:3001** | **服务监控面板（2026-09-13 新增）** | -| **home.xpcool.com** | **—（静态）** | **—** | **xpcool 服务台：9 站统一入口 + 存活状态（2026-09-13 建成，待上域名/证书）** | +| **home.xpcool.com** | **—（静态）** | **—** | **xpcool 服务台：9 站统一入口 + 存活状态。2026-09-13 站点/证书/nginx 已全部上线，`/api/kuma/` 同源反代到 Kuma；⚠️ 仅剩 DNSPod `home` A 记录未加，公网暂不可访问** | | —（暂无域名） | `bark` | 0.0.0.0:8081 | Bark 推送服务端 | | — | `xpcool-mysql` | 127.0.0.1:3306 | MySQL 8.0（库 `service`） | @@ -74,6 +77,13 @@ | file / read / tool / sub2api | 120s | 2 | 2000 | | code / status | 300s | 2 | 3000 | - **`service.xpcool.com` 单独放宽为 `["200-399","404"]`**：该后端是纯 POST 接口（遵循本项目"接口全 POST"规范），任何 GET 都 404；返回 404 说明 nginx + GoFrame 存活，**后端进程真挂时 nginx 返回 502，仍会判 DOWN**。 +- **公开状态页（2026-09-13 建，首页状态格的唯一数据源）**：`status.xpcool.com` 本身只是 Kuma 面板，**状态页是另一回事**，必须单独建，否则 `/api/status-page/` 恒 404。 + - 三张表配合：`status_page`（slug/title/published/theme…）→ `group`（**需 `public=1` 且 `status_page_id` 指向该页**）→ `monitor_group`（监控与分组的关联）。 + - **必须置 `monitor_group.send_url = 1`**。Kuma 的 `Monitor.toPublicJSON()` 是 `if (this.sendUrl) obj.url = this.customUrl ?? this.url;` —— 不开 `send_url` 时 API **不返回 `url` 字段**。而前端就是靠 `url` 里的主机名把监控和卡片对齐的，不返回就等于状态全「未接入」。 + - 当前实例：slug `xpcool`（与 `home.xpcool.com/src/composables/useStatus.ts` 里 `STATUS_PAGE_SLUG` 一致）、title「xpcool 服务台」、theme dark、`search_engine_index=0`（内部站不收录）、`show_certificate_expiry=1`、`auto_refresh_interval=60`；分组「自建服务」；9 个监控全挂且 `send_url=1`。 + - 建页脚本（幂等，含 DB 备份）：`E:\CentOS\deploy-home\kuma-statuspage.{sql,sh}`。**改库后必须 `docker restart uptime-kuma`** 才生效。 + - 验证端点：`/api/status-page/`（分组+监控列表）与 `/api/status-page/heartbeat/`（`heartbeatList`/`uptimeList`，键形如 `"3_24"`，前缀是监控 id）。**这两个端点在 status.xpcool.com 上公网匿名可达**，SSH 被拦时可直接用 HTTPS 验证状态页是否建成。 + - 回滚：`sudo cp /tmp/kuma.db.backup.<时间戳> /data/uptime-kuma/kuma.db && sudo docker restart uptime-kuma`。 - **通知渠道 = Bark（2026-09-13 已配置并验证）**：Kuma 2.5.3 原生支持 Bark（`/app/server/notification-providers/bark.js`）。`notification` 表：`id/name/active/user_id/is_default/config`，**`config` 是整条通知对象的 JSON 字符串（含 `type`），Kuma 用 `providerList[notification.type]` 派发，靠 `item.name` 索引**。 - **最大的坑：`type` 必须写 `Bark`（首字母大写）**，不是 `bark`。前端 `NotificationDialog.vue:257` 就是 `Bark: "Bark"`；写成小写则查不到 provider，**静默不发通知**。 - 当前配置：`id=1 / name='Bark 手机推送' / is_default=1`，`config` = `{"type":"Bark","barkEndpoint":"http://172.17.0.1:8081/sm5WnyANWx89GgLtFnRXhk","barkGroup":"Uptime-Kuma","apiVersion":"v1"}`。 diff --git a/.workbuddy/tmp/datadir.txt b/.workbuddy/tmp/datadir.txt new file mode 100644 index 0000000..e6ba62a --- /dev/null +++ b/.workbuddy/tmp/datadir.txt @@ -0,0 +1,58 @@ +=== E:\Programs\MySQL\data 内容 === +#innodb_redo [DIR] 2026/9/13 19:27:08 +#innodb_temp [DIR] 2026/9/13 19:27:08 +mysql [DIR] 2026/9/13 19:27:06 +performance_schema [DIR] 2026/9/13 19:27:05 +sys [DIR] 2026/9/13 19:27:06 +#ib_16384_0.dblwr [FILE] 2026/9/13 19:27:08 +#ib_16384_1.dblwr [FILE] 2026/9/13 19:27:01 +auto.cnf [FILE] 2026/9/13 19:27:01 +ca-key.pem [FILE] 2026/9/13 19:27:06 +ca.pem [FILE] 2026/9/13 19:27:06 +client-cert.pem [FILE] 2026/9/13 19:27:06 +client-key.pem [FILE] 2026/9/13 19:27:06 +ibdata1 [FILE] 2026/9/13 19:27:08 +ib_buffer_pool [FILE] 2026/9/13 19:27:07 +mysql.ibd [FILE] 2026/9/13 19:27:07 +private_key.pem [FILE] 2026/9/13 19:27:06 +public_key.pem [FILE] 2026/9/13 19:27:06 +server-cert.pem [FILE] 2026/9/13 19:27:06 +server-key.pem [FILE] 2026/9/13 19:27:06 +undo_001 [FILE] 2026/9/13 19:27:07 +undo_002 [FILE] 2026/9/13 19:27:07 +=== 递归前 30 项 === +E:\Programs\MySQL\data\#innodb_redo 09/13/2026 19:27:08 +E:\Programs\MySQL\data\#innodb_temp 09/13/2026 19:27:08 +E:\Programs\MySQL\data\mysql 09/13/2026 19:27:06 +E:\Programs\MySQL\data\performance_schema 09/13/2026 19:27:05 +E:\Programs\MySQL\data\sys 09/13/2026 19:27:06 +E:\Programs\MySQL\data\#ib_16384_0.dblwr 09/13/2026 19:27:08 +E:\Programs\MySQL\data\#ib_16384_1.dblwr 09/13/2026 19:27:01 +E:\Programs\MySQL\data\auto.cnf 09/13/2026 19:27:01 +E:\Programs\MySQL\data\ca-key.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\ca.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\client-cert.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\client-key.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\ibdata1 09/13/2026 19:27:08 +E:\Programs\MySQL\data\ib_buffer_pool 09/13/2026 19:27:07 +E:\Programs\MySQL\data\mysql.ibd 09/13/2026 19:27:07 +E:\Programs\MySQL\data\private_key.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\public_key.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\server-cert.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\server-key.pem 09/13/2026 19:27:06 +E:\Programs\MySQL\data\undo_001 09/13/2026 19:27:07 +E:\Programs\MySQL\data\undo_002 09/13/2026 19:27:07 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo10_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo11_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo12_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo13_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo14_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo15_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo16_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo17_tmp 09/13/2026 19:27:02 +E:\Programs\MySQL\data\#innodb_redo\#ib_redo18_tmp 09/13/2026 19:27:02 +=== 是否有其它残留 MySQL 数据目录 === +bin | docs | include | lib | share +=== error.log 是否存在 === +False +=== DONE === diff --git a/.workbuddy/tmp/enc2.txt b/.workbuddy/tmp/enc2.txt new file mode 100644 index 0000000..585f7c8 --- /dev/null +++ b/.workbuddy/tmp/enc2.txt @@ -0,0 +1,15 @@ +install-service.bat: no BOM (ok) +pull-prod.bat: no BOM (ok) +start-tunnel.bat: no BOM (ok) +stop-tunnel.bat: no BOM (ok) +=== 最终文件清单 === +credentials.ps1 1073 bytes +init-local.sql 1386 bytes +install-service.bat 506 bytes +install-service.ps1 5720 bytes +pull-prod.bat 179 bytes +pull-prod.ps1 3993 bytes +start-tunnel.bat 106 bytes +start-tunnel.ps1 2366 bytes +stop-tunnel.bat 105 bytes +stop-tunnel.ps1 944 bytes diff --git a/.workbuddy/tmp/env-probe.txt b/.workbuddy/tmp/env-probe.txt new file mode 100644 index 0000000..c429182 --- /dev/null +++ b/.workbuddy/tmp/env-probe.txt @@ -0,0 +1,19 @@ +=== DISK === +C: free=244.4GB total=522.3GB +D: free=173.1GB total=1,256.6GB +E: free=71.4GB total=127.0GB +=== ADMIN === +user=XXL\xxl elevated=False +=== PKG MGR === +winget: C:\Users\xxl\AppData\Local\Microsoft\WindowsApps\winget.exe +choco: MISSING +scoop: MISSING +curl: +tar: C:\WINDOWS\system32\tar.exe +docker: MISSING +=== PORT 3306/13306 === +3306/13306 both FREE +=== ENV === +ProgramFiles=C:\Program Files +USERPROFILE=C:\Users\xxl +=== DONE === diff --git a/.workbuddy/tmp/init.txt b/.workbuddy/tmp/init.txt new file mode 100644 index 0000000..df452e0 --- /dev/null +++ b/.workbuddy/tmp/init.txt @@ -0,0 +1,8 @@ +[..] mysqld --initialize-insecure +2026-09-13T11:27:01.022642Z 0 [System] [MY-013169] [Server] E:\Programs\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe (mysqld 8.0.46) initializing of server in progress as process 27208 +2026-09-13T11:27:01.834696Z 1 [System] [MY-013576] [InnoDB] InnoDB initialization has started. +2026-09-13T11:27:03.435969Z 1 [System] [MY-013577] [InnoDB] InnoDB initialization has ended. +2026-09-13T11:27:06.398862Z 6 [Warning] [MY-010453] [Server] root@localhost is created with an empty password ! Please consider switching off the --initialize-insecure option. +exit = 0 +datadir mysql subdir exists = True +datadir entries = 21 diff --git a/.workbuddy/tmp/initlocal.txt b/.workbuddy/tmp/initlocal.txt new file mode 100644 index 0000000..72b437d --- /dev/null +++ b/.workbuddy/tmp/initlocal.txt @@ -0,0 +1,3 @@ +exit = 1 +mysql: [Warning] Using a password on the command line interface can be insecure. +ERROR 2003 (HY000): Can't connect to MySQL server on '127.0.0.1:3306' (10061) diff --git a/.workbuddy/tmp/install1.txt b/.workbuddy/tmp/install1.txt new file mode 100644 index 0000000..ea5b6f1 --- /dev/null +++ b/.workbuddy/tmp/install1.txt @@ -0,0 +1,28 @@ +=== INITIALIZE === +mysqld.exe : 2026-09-13T11:27:15.263331Z 0 [System] [MY-013169] [Server] E:\Pro +grams\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe (mysqld 8.0.46) initializing of +server in progress as process 7428 +所在位置 行:449 字符: 12 ++ $initOut = & $mysqld "--defaults-file=$ini" --initialize-insecure --c ... ++ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + + CategoryInfo : NotSpecified: (2026-09-13T11:2...as process 7428 + :String) [], RemoteException + + FullyQualifiedErrorId : NativeCommandError + +2026-09-13T11:27:15.264745Z 0 [ERROR] [MY-010457] [Server] --initialize specifi +ed but the data directory has files in it. Aborting. +2026-09-13T11:27:15.264752Z 0 [ERROR] [MY-013236] [Server] The designated data +directory E:\Programs\MySQL\data\ is unusable. You can remove all files that th +e server added to it. +2026-09-13T11:27:15.264777Z 0 [ERROR] [MY-010119] [Server] Aborting +2026-09-13T11:27:15.264875Z 0 [System] [MY-010910] [Server] E:\Programs\MySQL\m +ysql-8.0.46-winx64\bin\mysqld.exe: Shutdown complete (mysqld 8.0.46) MySQL Com +munity Server - GPL. + +init exit = 1 +data\mysql exists = True +=== INSTALL SERVICE === +Install/Remove of the Service Denied! + +install exit = 0 +=== DONE === diff --git a/.workbuddy/tmp/probe2.txt b/.workbuddy/tmp/probe2.txt new file mode 100644 index 0000000..3ff4664 --- /dev/null +++ b/.workbuddy/tmp/probe2.txt @@ -0,0 +1,7 @@ +=== GROUPS === +group query failed +=== MIRROR TEST === +FAIL https://mirrors.cloud.tencent.com/mysql/downloads/MySQL-8.0/ :: 远程服务器返回错误: (404) 未找到。 +FAIL https://mirrors.tuna.tsinghua.edu.cn/mysql/downloads/MySQL-8.0/ :: 远程服务器返回错误: (404) 未找到。 +FAIL https://mirrors.ustc.edu.cn/mysql-ftp/Downloads/MySQL-8.0/ :: 远程服务器返回错误: (404) 未找到。 +=== DONE === diff --git a/.workbuddy/tmp/probe3.txt b/.workbuddy/tmp/probe3.txt new file mode 100644 index 0000000..e2f66b7 --- /dev/null +++ b/.workbuddy/tmp/probe3.txt @@ -0,0 +1,15 @@ +=== WHOAMI GROUPS === + +NT AUTHORITY\本地帐户和管理员组成员 已知组 S-1-5-114 只用于拒绝的组 +BUILTIN\Administrators 别名 S-1-5-32-544 只用于拒绝的组 + + + + +=== ROOT DIRS === +--- https://mirrors.tuna.tsinghua.edu.cn/mysql/ --- +../ | apt/ | yum/ +--- https://mirrors.cloud.tencent.com/mysql/ --- +../ | apt/ | yum/ +FAIL https://mirrors.ustc.edu.cn/mysql-ftp/ :: 远程服务器返回错误: (404) 未找到。 +=== DONE === diff --git a/.workbuddy/tmp/probe4.txt b/.workbuddy/tmp/probe4.txt new file mode 100644 index 0000000..81b60b3 --- /dev/null +++ b/.workbuddy/tmp/probe4.txt @@ -0,0 +1,12 @@ +dir ready: True +=== Programs content === +DBX | GoLand 2025.3 | Microsoft VS Code | MobaXterm | MobaXterm_Installer_v25.3 | MySQL | Trae CN | WebStorm 2024.3.4 | WorkBuddy +=== HEAD cdn.mysql.com === + +HTTP/1.1 200 Connection Established +HTTP/1.1 200 OK +Content-Length: 248009349 + + + +=== DONE === diff --git a/.workbuddy/tmp/probe5.txt b/.workbuddy/tmp/probe5.txt new file mode 100644 index 0000000..349486d --- /dev/null +++ b/.workbuddy/tmp/probe5.txt @@ -0,0 +1,11 @@ +=== E:\Programs\MySQL === +(empty dir) +=== E:\Programs\DBX === +dbx.exe [FILE] +uninstall.exe [FILE] +=== mysqld anywhere in E:\Programs === + +=== DBX exe === +E:\Programs\DBX\dbx.exe +E:\Programs\DBX\uninstall.exe +=== DONE === diff --git a/.workbuddy/tmp/procs.txt b/.workbuddy/tmp/procs.txt new file mode 100644 index 0000000..e03b42d --- /dev/null +++ b/.workbuddy/tmp/procs.txt @@ -0,0 +1,14 @@ +=== mysqld 进程 === +mysqld 未运行 +=== ssh 进程 === +ssh 未运行 +=== 监听端口 3306/13306/33060 === +均未监听 +=== error.log tail === +2026-09-13T11:27:57.291523Z 0 [System] [MY-010116] [Server] E:\Programs\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe (mysqld 8.0.46) starting as process 45320 +2026-09-13T11:27:57.772254Z 1 [System] [MY-013576] [InnoDB] InnoDB initialization has started. +2026-09-13T11:28:01.565772Z 1 [System] [MY-013577] [InnoDB] InnoDB initialization has ended. +2026-09-13T11:28:02.117475Z 0 [Warning] [MY-010068] [Server] CA certificate ca.pem is self signed. +2026-09-13T11:28:02.118610Z 0 [System] [MY-013602] [Server] Channel mysql_main configured to support TLS. Encrypted connections are now supported for this channel. +2026-09-13T11:28:02.155511Z 0 [System] [MY-011323] [Server] X Plugin ready for connections. Bind-address: '::' port: 33060 +2026-09-13T11:28:02.155600Z 0 [System] [MY-010931] [Server] E:\Programs\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe: ready for connections. Version: '8.0.46' socket: '' port: 3306 MySQL Community Server - GPL. diff --git a/.workbuddy/tmp/start1.txt b/.workbuddy/tmp/start1.txt new file mode 100644 index 0000000..2e269bf --- /dev/null +++ b/.workbuddy/tmp/start1.txt @@ -0,0 +1,12 @@ +[..] starting mysqld +launched pid = 45188 +3306 listening = True (after 3 s) +process alive = True +=== error.log tail === +2026-09-13T11:27:57.291523Z 0 [System] [MY-010116] [Server] E:\Programs\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe (mysqld 8.0.46) starting as process 45320 +2026-09-13T11:27:57.772254Z 1 [System] [MY-013576] [InnoDB] InnoDB initialization has started. +2026-09-13T11:28:01.565772Z 1 [System] [MY-013577] [InnoDB] InnoDB initialization has ended. +2026-09-13T11:28:02.117475Z 0 [Warning] [MY-010068] [Server] CA certificate ca.pem is self signed. +2026-09-13T11:28:02.118610Z 0 [System] [MY-013602] [Server] Channel mysql_main configured to support TLS. Encrypted connections are now supported for this channel. +2026-09-13T11:28:02.155511Z 0 [System] [MY-011323] [Server] X Plugin ready for connections. Bind-address: '::' port: 33060 +2026-09-13T11:28:02.155600Z 0 [System] [MY-010931] [Server] E:\Programs\MySQL\mysql-8.0.46-winx64\bin\mysqld.exe: ready for connections. Version: '8.0.46' socket: '' port: 3306 MySQL Community Server - GPL. diff --git a/.workbuddy/tmp/syntax.txt b/.workbuddy/tmp/syntax.txt new file mode 100644 index 0000000..e361a5e --- /dev/null +++ b/.workbuddy/tmp/syntax.txt @@ -0,0 +1,5 @@ +[OK] credentials.ps1 +[OK] install-service.ps1 +[OK] pull-prod.ps1 +[OK] start-tunnel.ps1 +[OK] stop-tunnel.ps1 diff --git a/.workbuddy/tmp/unzip.txt b/.workbuddy/tmp/unzip.txt new file mode 100644 index 0000000..c458e1d --- /dev/null +++ b/.workbuddy/tmp/unzip.txt @@ -0,0 +1,7 @@ +size = 236.5 MB +md5 = 003f527d5df61b663ff191038cd676bd +MD5 OK +[..] extracting ... +tar exit = 0 +target exists = True +[bin] mysql.exe, mysqladmin.exe, mysqlbinlog.exe, mysqlcheck.exe, mysqld.exe, mysqldump.exe, mysqlimport.exe, mysqlpump.exe